4.207 RCOM-WNDF Overflow/Water Make-up/Low Water Cutoff Control
RCOM-WNDF Wall-Mounted Overflow/Make-Up/Cut-Off/Fill
The RCOM-WNDF Wall-Mounted Combination Overflow/Water Make-up/Low Water Cutoff Control consists of a housing of molded fiberglass niche sensor/overflow housing with a brass cover plate, stainless steel fasteners, a sensor compression fitting, a 3/4″ (F) N.P.T. conduit entry, a 2″ adjustable overflow, and a 3/4″ (F) PVC (slip) fill connection. Unit features multi-level float-type sensor of brass and Buna-N construction with a 1 3/4″ adjustability range and includes 100 ft. of pre-attached 4-conductor, color-coded sensor cable. When purchasing a component system, package must include a RCOM-PNL Series, dual function, solid-state water level control panel. See cut sheet RCOM-PNL3 for control panel rated for 120 VAC with internally transformed 24 volt output circuit. Please refer to the cut sheet for additional technical data.
Notes:
- A normally closed, electrically actuated, 120VAC solenoid valve is required to operate the water makeup function. See RSV Series.
- A lighting and/or motor contactor is required to operate the low level cutoff function.
- The PVC overflow standpipe is removable and furnished full height to provide a 1/2″ margin above the sensor “high limits” position. Trim as required and reinsert.
- This unit is to be used in applications where shut-down gain is 2-1/2″ or less.
