4.401 RMS-NS Fill Manifold System
RMS-NS Fill Manifold System
The RMS-NS Fill Manifold System is factory engineered and pre-fabricated. The solenoid valve and manual bypass assembly allows pool water to be made up either electronically in conjunction with the RCOM Series level sensor control, or manually by isolating the solenoid valve and opening the manual fill valve. The RMS-NS is constructed of copper and brass with a 3/4″ 120 VAC solenoid fill valve, manual bypass and isolation valves, union fittings, hose bib, plugged female threaded risers on each loop side for water hammer arrestor connection (by Installer), a liquid-filled inlet pressure gauge and (F) N.P.T. connections. Available in four (4) fill line pipe sizes. Please refer to the cut sheet for additional data.
Notes:
- Left to right flow direction
- Water supply to manifold must include a backflow preventer to meet local code requirements
- Regulate upstream pressure to a maximum of 50 P.S.I. for proper operation. Provide pressure regulator as required (by installer) to maintain pressure range.
- Minimum pressure required to operate: 5 P.S.I.
